WA150-5

REQUEST QUOTE / INFORMATION

 

7,425 Kg

Operating Weight

96 HP

Horsepower

1.5 m³

Bucket Capacity

OVERVIEW

FEATURES

PRODUCTIVITY

  • High performance SAA4D102E-2 Engine
  • Low fuel consumption
  • Electronically-Controlled HST using 1-Pump, 2-Motor Ststem
  • Electronically-Controlled HST with Variable Shift Control System
  • Dual-mode engine power select system
  • Traction Control System

INCREASED RELIABILITY & SERVICEABILITY

  • Main Monitor - EMMS (Equipment Management Monitoring System)
  • Swing-Out Radiator
  • Full Side-Opening Gull-Wing Engine Doors
  • Extended Service Interval
  • Overrun Prevention System
  • Fully Hydraulic Wet Multi-disc Service Brakes
  • High-rigidity Frames
  • Komatsu Components

OPERATOR COMFORT

  • New Cab Layout
  • Two Door Walk-Through Cab
  • Low-noise Design
  • Easy-to-operate Loader Control Mono-lever
  • Electrically Controlled Directional Lever
  • Tiltable Steering Column

Specifications

ENGINE

Model   Komatsu SAA4D102E-2
Type   Water-cooled, 4-cycle
Aspiration   Turbocharged, air-to-air aftercooled
Number of cylinders   4
Bore   102 mm
Stroke   120 mm
Piston displacement   3.92 ltr
     
HORSEPOWER:    
SAE J1995 - Gross 74 kW 99 HP
ISO 9249 / SAE J1349 - Net 71 kW 96 HP
Rated rpm   2000 min-1
Air Cleaner   Dry type double elements & precleaners, with dust indicator EPA Tier2 and EU Stage 2 emission certified
Governor   All speed, mechanical

 

TRANSMISSION

Hydrostatic, 1 pump, 2 motors with speed range select Travel speed (Both Forward and Reverse)

AXLES & FINAL DRIVES

Drive system   Four-wheel drive
Front   Fixed, full-floating
Rear   Center-pin support, full-floating
Reduction gear   Spiral bevel gear
Differential gear   Torque proportional
Final reduction gear   Planetary gear, single reduction

BRAKES

Services brakes   Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake   Wet disc brake on transfer output shaft
Emergency brake   Parking brake is commonly used

STEERING SYSTEM

Type   Full-hydraulic power steering independent of engine rpm
Steering angle   40 degree each direction
Min. turning radius at the center outside tire   4470 mm

BUCKET CONTROL

The use of a PPC hydraulic control valve offers lighter operating effort for the work equipment control levers. The reduction in the lever effort and travel makes it easy to operate in the work environment.

Control Position    
Boom   Raise, hold, lower, and float
Bucket   Tilt-back, hold, and dump

COOLANT & LUBRICANT REFILLING CAPACITY

Cooling System   17.0 L
Fuel Tank   133.0 L
Engine   12.5 L
Hydraulic System   47.0 L
Axle (Front)   14.0 L
Axle (Rear)   14.5 L
Transmission   4.4 L

HYDRAULIC SYSTEM

  • Capacity (discharge flow)
    • Maximum flow for loader circuit :
      • Loader + steering pump : 123 L/min
      • Pilot pump (Gear-type) : 38 L/min
    Relief valve setting
    • Loader : 210 kg/cm3
    • Steering : 190 kg/cm3
  • Control valve : 2-spool open cebter type
  • Hydraulic cylinders (Loader & steering) : Double-acting, piston
  • Hydraulic cycle time (rated load in bucket) :
    • Raise : 5.8 sec
    • Dump : 1.1 sec
    • Lower (empty) : 3.6 sec

Standard

  • Alternator, 35A / 24V
  • Axles, semi floating with torque proportioning
  • Back-up alarm
  • Back-up light, rear
  • Batteries, 92Ah / 2x 12V
  • Bucket positioner, automatic
  • ROPS/FOPS cabin
  • Counterweight
  • Engine, Komatsu SAA4D102E-2
  • Engine shut-off system, electronic
  • Engine water separator
  • Fan, hydraulic driven, swing out
  • Fenders, rear
  • Horn, electric
  • Lift cylinders and bucket cylinders
  • Lights
  • Mono-lever loader control
  • Parking brakes, wet disc type
  • Seat, suspension type with reclining & seat belt
  • Starting motor, 5.5 kW/ 24V
  • Steering wheel, tiltable
  • Rims & Tires - 16.9-24-10PR (L2), tubeless
  • 2-spool valve for boom and bucket controls with PPC

Optional